? semiconductor components industries, llc, 2007 may, 2007 - rev. 3 1 publication order number: PN2907A/d PN2907A preferred device general purpose transistor pnp silicon features ? these are pb-free devices* maximum ratings rating symbol value unit collector-emitter voltage v ceo -60 vdc collector-base voltage v cbo -60 vdc emitter-base voltage v ebo -5.0 vdc collector current - continuous i c -600 madc total device dissipation @ t a = 25 c derate above 25 c p d 625 5.0 mw mw/ c total device dissipation @ t c = 25 c derate above 25 c p d 1.5 12 w mw/ c operating and storage junction temperature range t j , t stg - 55 to +150 c thermal characteristics characteristic symbol max unit thermal resistance, junction- to- ambient r ja 200 c/w thermal resistance, junction-to-case r jc 83.3 c/w stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. http://onsemi.com collector 3 2 base 1 emitter PN2907A = device code y = year ww = work week = pb-free package (note: microdot may be in either location) marking diagram pn2 907a yww preferred devices are recommended choices for future use and best overall value. see detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. ordering information 1 2 3 1 2 bent lead tape & reel ammo pack straight lead bulk pack 3 to-92 case 29 style 1
PN2907A http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min max unit off characteristics collector-emitter breakdown voltage (note 1) (i c = -10 madc, i b = 0) v (br)ceo -60 - vdc collector-base breakdown voltage (i c = -10 adc, i e = 0) v (br)cbo -60 - vdc emitter-base breakdown voltage (i e = -10 adc, i c = 0) v (br)ebo -5.0 - vdc collector cutoff current (v ce = -30 vdc, v eb(off) = -0.5 vdc) i cex - -50 nadc collector cutoff current (v cb = -50 vdc, i e = 0) (v cb = -50 vdc, i e = 0, t a = 150 c) i cbo - - -0.01 -10 adc base current (v ce = -30 vdc, v eb(off) = -0.5 vdc) i b - -50 nadc on characteristics dc current gain (i c = -0.1 madc, v ce = -10 vdc) (i c = -1.0 madc, v ce = -10 vdc) (i c = -10 madc, v ce = -10 vdc) (i c = -150 madc, v ce = -10 vdc) (note 1) (i c = -500 madc, v ce = -10 vdc) (note 1) h fe 75 100 100 100 50 - - - 300 - - collector-emitter saturation voltage (note 1) (i c = -150 madc, i b = -15 madc) (i c = -500 madc, i b = -50 madc) v ce(sat) - - -0.4 -1.6 vdc base-emitter saturation voltage (note 1) (i c = -150 madc, i b = -15 madc) (i c = -500 madc, i b = -50 madc) v be(sat) - - -1.3 -2.6 vdc small-signal characteristics current-gain - bandwidth product (notes 1 and 2), (i c = -50 madc, v ce = -20 vdc, f = 100 mhz) f t 200 - mhz output capacitance (v cb = -10 vdc, i e = 0, f = 1.0 mhz) c obo - 8.0 pf input capacitance (v eb = -2.0 vdc, i c = 0, f = 1.0 mhz) c ibo - 30 pf switching characteristics turn-on time (v cc = -30 vdc, i c = -150 madc, i b1 = -15 madc) (figures 1 and 5) t on - 45 ns delay time t d - 10 ns rise time t r - 40 ns turn-of f time (v cc = -6.0 vdc, i c = -150 madc, i b1 = i b2 = 15 madc) (figure 2) t off - 100 ns storage time t s - 80 ns fall time t f - 30 ns 1. pulse test: pulse width 300 s, duty cycle 2%. 2. f t is defined as the frequency at which |h fe | extrapolates to unity.
PN2907A http://onsemi.com 3 ordering information device package shipping ? PN2907Ag to-92 (pb-free) 5000 units / bulk PN2907Arlrag to-92 (pb-free) 2000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. 0 0 -16 v 200 ns 50 1.0 k 200 -30 v to oscilloscope rise time 5.0 ns +15 v -6.0 v 1.0 k 37 50 1n916 1.0 k 200 ns -30 v to oscilloscope rise time 5.0 ns input z o = 50 prf = 150 pps rise time 2.0 ns p.w. < 200 ns input z o = 50 prf = 150 pps rise time 2.0 ns p.w. < 200 ns figure 1. delay and rise time test circuit figure 2. storage and fall time test circuit
PN2907A http://onsemi.com 4 typical characteristics figure 3. dc current gain i c , collector current (ma) 0.3 0.5 0.7 1.0 3.0 0.2 -0.1 t j = 125 c 25 c -55 c v ce = -1.0 v v ce = -10 v h fe , normalized current gain 2.0 -0.2 -0.3 -0.5 -0.7 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 -50 -70 -100 -200 -300 -500 figure 4. collector saturation region i b , base current (ma) -0.4 -0.6 -0.8 -1.0 -0.2 v , collector-emitter voltage (volts) 0 ce i c = -1.0 ma -0.005 -10 ma -0.01 -100 ma -500 ma -0.02 -0.03 -0.05 -0.07 -0.1 -0.2 -0.3 -0.5 -0.7 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 -50 figure 5. turn-on time i c , collector current 300 -5.0 figure 6. turn-off time i c , collector current (ma) -5.0 t, time (ns) t, time (ns) 200 100 70 50 30 20 10 7.0 5.0 3.0 -7.0 -10 -20 -30 -50 -70 -100 -200 -300 -500 t r 2.0 v t d @ v be(off) = 0 v v cc = -30 v i c /i b = 10 t j = 25 c 500 300 100 70 50 30 20 10 7.0 5.0 -7.0 -10 -20 -30 -50 -70 -100 -200 -300 -500 200 t f t s = t s - 1/8 t f v cc = -30 v i c /i b = 10 i b1 = i b2 t j = 25 c
PN2907A http://onsemi.com 5 typical small-signal characteristics noise figure v ce = 10 vdc, t a = 25 c figure 7. frequency effects f, frequency (khz) 10 0.01 figure 8. source resistance effects r s , source resistance (ohms) nf, noise figure (db) nf, noise figure (db) f = 1.0 khz i c = -50 a -100 a -500 a -1.0 ma r s = optimum source resist ance 8.0 6.0 4.0 2.0 0 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 10 8.0 6.0 4.0 2.0 0 50 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k i c = -1.0 ma, r s = 430 -500 a, r s = 560 -50 a, r s = 2.7 k -100 a, r s = 1.6 k figure 9. capacitances reverse voltage (volts) 30 figure 10. current-gain bandwidth product i c , collector current (ma) c, capacitance (pf) -0.1 2.0 figure 11. on voltage i c , collector current (ma) -1.0 figure 12. temperature coefficients i c , collector current (ma) v, voltage (volts) t j = 25 c v be(sat) @ i c /i b = 10 v ce(sat) @ i c /i b = 10 v be(on) @ v ce = -10 v r vc for v ce(sat) f t , current-gain bandwidth product (mhz) coefficient (mv/ c) 20 10 7.0 5.0 3.0 -0.2 -0.3 -0.5 -1.0 -2.0 -3.0 -5.0 -10 -20 -30 400 300 200 100 80 60 40 30 20 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 -1000 -0.8 -0.6 -0.4 -0.2 0 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 +0.5 0 -0.5 -1.0 -1.5 -2.0 -2.5 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 c eb c cb v ce = -20 v t j = 25 c r vb for v be
PN2907A http://onsemi.com 6 package dimensions to-92 (to-226) case 29-11 issue am notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. contour of package beyond dimension r is uncontrolled. 4. lead dimension is uncontrolled in p and beyond dimension k minimum. r a p j l b k g h section x-x c v d n n xx seating plane dim min max min max millimeters inches a 0.175 0.205 4.45 5.20 b 0.170 0.210 4.32 5.33 c 0.125 0.165 3.18 4.19 d 0.016 0.021 0.407 0.533 g 0.045 0.055 1.15 1.39 h 0.095 0.105 2.42 2.66 j 0.015 0.020 0.39 0.50 k 0.500 --- 12.70 --- l 0.250 --- 6.35 --- n 0.080 0.105 2.04 2.66 p --- 0.100 --- 2.54 r 0.115 --- 2.93 --- v 0.135 --- 3.43 --- 1 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. contour of package beyond dimension r is uncontrolled. 4. lead dimension is uncontrolled in p and beyond dimension k minimum. r a p j b k g section x-x c v d n xx seating plane dim min max millimeters a 4.45 5.20 b 4.32 5.33 c 3.18 4.19 d 0.40 0.54 g 2.40 2.80 j 0.39 0.50 k 12.70 --- n 2.04 2.66 p 1.50 4.00 r 2.93 --- v 3.43 --- 1 t straight lead bulk pack bent lead tape & reel ammo pack style 1: pin 1. emitter 2. base 3. collector on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. typical parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including typicals must be validated for each custom er application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800-282-9855 toll free ?usa/canada europe, middle east and africa technical support: ?phone: 421 33 790 2910 japan customer focus center ?phone: 81-3-5773-3850 PN2907A/d literature fulfillment : ?literature distribution center for on semiconductor ?p.o. box 5163, denver, colorado 80217 usa ? phone : 303-675-2175 or 800-344-3860 toll free usa/canada ? fax : 303-675-2176 or 800-344-3867 toll free usa/canada ? email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loca l sales representative
|
